GX3330BLS Standard Edition / IP67 Brushless Servo Motor
The GX3330BLS is a GXSERVO all metal servo motor in the Standard Edition and IP67 configuration. The customer brochure provides the published electrical, mechanical, environmental and dimensional data for this model. Use the attached engineering drawings and specification table to confirm fit, control requirements and application details before ordering.
Product Details
Product Overview
The GX3330BLS is a GXSERVO all metal servo motor in the Standard Edition and IP67 configuration. The customer brochure provides the published electrical, mechanical, environmental and dimensional data for this model. Use the attached engineering drawings and specification table to confirm fit, control requirements and application details before ordering.
Product Details
| Control System | PWM pulse-width modulation control 1520uS/333Hz |
|---|---|
| Operating Voltage | 6.0~8.4V DC |
| Standby Current | <=20mA |
| Stall Current | 6.0V <= 3A; 7.4V <= 4A; 8.4V <= 4.5A |
| No Load Speed | 6.0V <= 0.08 sec/60°; 7.4V <= 0.07 sec/60; 8.4V <= 0.06 sec/60° |
| Max.Torque* | 6.0V >= 25kgf.cm; 7.4V >= 30kgf.cm; 8.4V >= 34kgf.cm |
| Rotating Direction | CCW(500-2500us) |
| Pulse Width Range | 500-2500us |
| Neutral Position | 1500us |
| Operating Travel Angle | 180+10°(500~2500us) It can be customized to 358° + 10° (500~2500us) |
| Sizes | 40*20*38mm |
| Mechanical Limit Angle | 360° |
| Dead Band Width | <= 2 us |
| Operating Temperature Range | -20 C~+80 C |
| Storage Temperature Range | -20 C~+60 C |
| Weight | 80g (not including accessory) |
| Case Material | Aluminum Alloy |
| Gear Set Material | Metal gear |
| Motor Type | Brushless |
Engineering Drawings
Request a Quote
Contact our team with your operating voltage, control signal, load conditions and target quantity for application confirmation.
Recommended Models
Compare related models from the current catalog before sending your project requirements.
Request a Quote for GX3330BLS
Tell us your application, required configuration and expected quantity. The product model is included with your inquiry automatically.
